GEL Waterproof Type General (25 kg./Set)

Two component water proof type cement base, general purpose

Features

• Cement base water proof, non-toxicity requirement especially for potable water such as water tank
• Easy to mix and apply
• Breathable and allows transmission of water vapour from interior of building
• Protection of concrete against the effects of CO2, de-icing salts and water penetration
• Flexible and cover cracks or pores of all masonry

Applications

• Suitable for applying waterproofing in concrete such as concrete slab, concrete wall, bathroom, swimming pool, water tank, septic tank etc

Surface Preparation

• Clean surface from dust, concrete debris or oil stain
• If the concrete surface is cracked should be repaired the cracks
• Spray the water allow the concrete surface to be moist before apply water proof

Mixing

• Mix cement with additive according to mixing ratio in technical table
• Mix by electric drill speed 500 rpm until mixture is homogeneous
• After mixing, use all within 30 minutes

Remark: Do not add water

Work Procedure

• Apply water proof first layer by brush while concrete surface have be moist and leave it about 3 – 4 hours before apply second layer
• Apply second layer by applying perpendicular to the first  layer
• Do not expose the surface to water for 3 days after applying
• For tiling should be leave the substrate surface to dry about 3 days

Precaution

• Avoid using in sunlight place
• Do not spray water before apply second layer
• Clean the tools immediately after use.