GEL Waterproof Type Flexi (24 kg./Set)

Two-component general flexible cementitious waterproof

Features

• Cement base waterproof, non-toxicity requirement,especially for potable water such as water tank
• Easy to mix and apply
• Breathable and allows transmission of water vapourfrom interior of building
• Protection of concrete against the effects of CO2,de-icing salts and water penetration
• Flexible and able to conceal any cracks or pores of all masonry

Applications

• Suitable for applying waterproofing in concrete such as concrete slab, concrete wall, bathroom, swimming pool, water tank, septic tank etc

Surface Preparation

• Clean surface from dust, concrete debris or oil stain
• If the concrete surface is cracked, it should be repaired
• Spray the water allow the concrete surface to be moist before applying waterproof

Mixing

• Mix cement with additive according to mixing ratio in technical table
• Mix by electric drill speed 500 rpm until mixture is homogeneous
• After mixing, it should be used within 30 minutes
  

Remark: Do not add water

Application procedure

• Apply waterproof first layer by using brush while concrete surface have be moist and leave it about 3-4 hours before apply second layer
• Apply second layer by applying perpendicular to the first layer
• Do not expose the surface to water for 3 days after applying
• For tiling, it should be waited for at least 3 days
  

Precaution

• Avoid using in sunlight place
• Do not spray water before apply second layer
• Clean the tools immediately after use