Fisher FIS EM Plus

The powerful injection mortar for rebar connections and cracked concrete.

Package 390ml. / 585ml.

Introduction

The fischer injection mortar FIS EM Plus is a high-quality epoxy mortar for top load-bearing capacity in cracked and non-cracked concrete and for seismic applications in performance categories C1 and C2.

Applications

• Post-installed rebar connections
• Jointers for concrete layers
• Rim beam anchorings
• Seismic applications
• Anchorings in diamond-drilled or in waterfilled drill holes
• Heavy steel constructions
• Silo installations
• Tall shelving
• Sound barriers
• Temporary or removable fixings (with internal threaded anchor RG M I)
• Anchorings in sealing surfaces according to WRL (Water Ressources Law)
• Anchorings in wood

Features/Advantages

• Certified according to ICC and ETA standards.
  
• 100-year service life warranty for post-installed rebar connections and anchorings in cracked and non-cracked concrete as per ETA, and 120 years according to the expert report from IEA Stuttgart.
  
• The epoxy resin is suitable for diamond-drilled holes and water-filled holes. It can be used in seismic areas with C1 and C2 performance, providing excellent adhesion even under harsh conditions.
  
• Maximum load capacity for diamond-drilled holes without additional roughening of the hole surface.
  
• FIS EM Plus has been enhanced to deliver increased load capacity for rebar anchoring in both cracked and non-cracked concrete.
  
• Can be used for rebar connections with diameters from 8 to 40 mm, including applications requiring resistance to vibrations.
  
• FIS A threaded rods allow flexible load design by choosing the embedment depth.
  
• FIS EM Plus can be used at temperatures down to -5°C and has fire resistance rating of R 240.
  
• Shelf life of 36 months.

Application Procedure

• The epoxy mortar FIS EM Plus combined with the FIS A anchor rod, is suitable for pre-positioned and push-through installation and with the internal threaded anchor RG M I for pre-positioned installation.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The mortar is injected bubble-free from the drill hole base.
• The mortar bonds the entire surface of the anchor with the drill hole wall and seals off the drill hole.
• The anchor is set manually by lightly rotating it until it reaches the drill hole base.
• During push-through installation, the annular gap between the anchor rod and attachment is filled with FIS EM Plus.

Building Materials

• Concrete C20/25 to C50/60, cracked and non-cracked
• Sealing surfaces according WRL (Water Ressouces Law)
• Glued laminated or glued solid timber of spruce (Picea abies), fir (Abies alba) or pine (Pinus sylvestris)
• Natural stone with dense structure

Product Standard

• ICC-ES
• ETA-17/0979
• ETA-23/0842
• ETA-19/0657
• ETA-22/0001
• ETA-17/1056
• DoP No. 0341
• DoP No. 0236
• DoP No. 0351
• ESR-1990
• Z-74.8-199
• Z-74.8-211
• Z-9.1-914
• Report No MRF 19 26082687/C
• EPD-DBC-FIW-20230530-CBA1-EN