GEL Polyurethane Self-Leveling

Attribute:

Self-leveling polyurethane 4 part for concrete floor finishing recommend 3-4 mm. thickness

Share

Self-leveling polyurethane 4 part for concrete floor finishing recommend 3-4 mm. thickness

Features

  • Easy to clean and maintenance
  • Smooth and seamless surface
  • Excellent resistant to corrosion, abrasion, chemical
  • Excellent resistant to moisture and weather

Applications

  • Topcoat for flooring systems
  • Food and beverage factory
  • Chemical factory
  • Pharmaceutical industry
  • Warehouse and storage areas

Surface Preparation

  • Clean surface from dust, concrete debris or oil stain
  • If the concrete surface is cracked should be repaired the cracks
  • Existing concrete surface should has a compressive strength at least 25 N/mm2 and tensile strength at least 1.5 N/mm2
  • Groove cutting before installation polyurethane self-leveling at size width x length 1.5x1.5 m or 2x2 m. Depth 4 mm.

Mixing

  • Pour part A, part B and part D into mixing bucket
  • Mix part A, part B and part D together with electric drill. Use low speed to mixing by time about 30 seconds
  • After that pour part C into mixing bucket and mix together until homogeneous it take time about 90 seconds

Application procedure

  • After mixing, pour polyurethane self-leveling into prepared concrete surface by trowel
  • Use a spike roller to roll over the surface to expel air bubbles
  • Installation should be done within 10 - 15 minutes as the product dries quickly.

Precautions

  • Work areas should be well ventilated
  • Always wear Personal Protective Equipment (PPE) during application
  • In case of contact with skin, wash with clean water
  • In case of eye-contact, wash immediately with an abundance of clean water and contact eye-doctor
  • Tool and equipment should be cleaned Immediately by thinner after use

Powered by MakeWebEasy.com